virtuex combination table and mitre chop saws
This superb machine is highly
versatile because it can be used not only as a chop saw but a table saw
as well. The main frame and base are of cast alloy, the chop saw table
is graduated for all angles 0 - 45º. The upper table is adjustable
for depth of cut and is fitted with a riving knife, guard and an adjustable
ripping fence. The on/off switch is situated on the top of the handle
and can be locked on, when the saw is used for ripping the handle can
be lowered below the table level. A well engineered machine for the professional.
TM43J
Rating:- 240 / 110 volt available.
Power:- 1100 watts,
No load speed:- 5,500,
Weight:- 17kgs
Cross cut capacity at 90º 62 x 145mm.
Cross cut capacity at 45º 62 x 95mm.
Depth of cut on upper table:- 40mm
Fitted with a 250mm x 40 teeth tungsten blade. £460.00 £540.50
Rating:- 240 / 110 volt available.
Power:- 1500 watts,
No load speed:- 3,700,
Weight:- 18kgs
Cross cut capacity at 90º 62 x 145mm.
Cross cut capacity at 45º 62 x 95mm.
Depth of cut on upper table:- 40mm
Fitted with a 300mm x 48 teeth tungsten blade. £515.00 £605.12
Three phase version of TM33H Fitted with a 300mm x 48 tooth tungsten blade.